1. Puts on make-up the cotton and kapok production process: This
equipment is divides cuts the good degreasing to lap, the
adhesive-bonded cloth or the gauze, laying aside raw material after
the compaction, the heating embosses, rolls cuts process one time
to complete;
2. The main feature The high speed punch press revolving blanking
principle of work, the technology is mature, the work is stable,
the service work load are few;
3. Output mode: The pipeline arrangement output, the code falls
neatly, the bagging is convenient, a person then operates the
complete machine, big reduced artificial amount of use;
4. The good man-machine operation contact surface, may unfold the
real time operation information, is advantageous for the production
monitoring;
5. The mold replacement is convenient, the construction cost is
lower than greatly rolls cuts the carving flower cutter bar,
moreover after the mold wears, easy to repair, does not need to
discard the replacement, saves the maintenance cost;
6. Put on make-up the cotton and kapok .
Note: If time product manufacturing must spurt the rubber with the
multilayer material compound, must additional install the glue
sprayer.
Technique parameter
Model | KR-MD-A cotton pad making machine |
Installing quipment tatol output | 5kw(380V 50HZ) |
Output velocity | 20-30 meters/minutes |
Production specification | According to the request adjustment |
Air pressure | 0.6-0.8 Mpa |
Machine size | 2.2m*0.85m*1.6m (long * wide * high) |
Machine weight | 390kg |





